|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SANDTROOPER (TD) BACKPACKOne of the hardest questions that I've been asked - and asked of others - is where do you get all those sandtrooper backpack parts? I went on a rather un-informed shopping-spree through my local Wal-Mart and Lowe's DIY store, and made my first sandtrooper backpack, essentially making it up as I went along, resulting in a rather non-screen-accurate pack. So now I've made a SECOND sandtrooper backpack, and I've actually done some research on it this time, before I went shopping. If you know of any way that I can improve this by using different parts, please feel free to contat me. I am, however, approaching this from a budgetary standpoint, trying to keep this project affordable but at the same time creating a very screen-accurate TD backpack when finished. First however, and MOST IMPORTANTLY, a great big THANK YOU to the source of most of my information on my backpack build - TD2441, Rachel Smith, UK Garrison! :) Below are listed the parts that I used, where I bought them from, and how much those parts cost: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PART |
SOURCE |
COST |
1-Frame |
$50.00 |
|
2-Main Boxes |
$11.20 |
|
3-Upper-Left Box |
$15.00 |
|
4-Upper Center Cylinder |
$5.00 |
|
5-Upper Cylinder Cap |
$7.50 |
|
6-Upper Right Mini-Box |
$1.12 |
|
7-Upper Right Mini-Box Tube |
FluidMaster Pro 45 Fill Valve (bottom half) |
$25.00 |
8-Radio Box |
$15.00 |
|
9-Radio Box FacePlate |
Recreated Sonix 75 Victory Radio |
$54.00 |
10-"Bee Stinger" Bottom Case |
$11.00 |
|
11-"Bee Stinger" Bottom Tube |
$? |
|
12-Toilet Cistern & "Stackers" |
$30.00 |
|
13-Toilet Cistern Descender Cone |
Black Plastic Funnel - source not yet found |
$? |
14-Ventilator Cylinder Cap |
$7.50 |
|
15-Ventilator Cylinder |
$5.00 |
|
16-Mortar Tube |
$20.00 |
|
17-Mortar Tube Radar Dish |
$15.00 |
|
18-Mortar Tube Caps |
Salvaged from TK Armor |
$7.00 |
19-Mortar Tube Control Panel |
Salvaged from TK Armor |
$7.00 |
20-Ammo Cannisters (5x) |
Shotgun Shells (Empty! Be SAFE!!!) |
$15.00 |
In summary, if you are using my parts list, you can expect to pay about $250-$275 (USD) for your kit, but end up having an easy-to-build, relatively affordable, and still screen-accurate sandtrooper backpack.
DISCLAIMER:
This site is in no way sponsored or endorsed by: George Lucas, Lucasfilm
Ltd., LucasArts Entertainment Co., or any affiliates. Star Wars and all
its characters are © and TM Lucasfilm Ltd.
All costumes and props on this website are replicas created solely for the enjoyment of their perspective owners. All copyrights ©, registered trademarks ®, trademarks (TM), or service mark (SM) used on this website belong to their respective owners.